9702_m24_qp_22
A paper of Physics, 9702
Questions:
8
Year:
2024
Paper:
2
Variant:
2
Login to start this paper & get access to powerful tools
1
Table 1.1 lists some SI quantities. Complete the table by indicating with a tick (✓) which rows are SI base quantities. Table 1.1 quantity base quantity current energy force mass Use the definition of power to determine its SI base units. SI base units A light meter is used to measure the intensity of light in a classroom. Daylight is incident normally on the sensor of the meter. The sensor has an area of 2.2 cm2. The reading on the meter is 950 W m–2. Calculate the power of the daylight incident on the sensor. power = W
1. Physical quantities and units  →  1.2. SI units
15. Ideal gases  →  15.1. The mole
Open
2
Define acceleration. An Olympic diver stands on a platform above a pool of water, as shown in . 60° platform 5.9 m s–1 1.2 m 9.0 m horizontal surface of water diver (not to scale) When the diver is on the platform his centre of gravity is a vertical height of 9.0 m above the surface of the water. The diver jumps from the platform with a velocity of 5.9 m s–1 at an angle of 60° to the horizontal. Air resistance is negligible. When the diver hits the surface of the water, his centre of gravity is a vertical height of 1.2 m above the surface of the water. Calculate the speed of the diver at the instant he hits the surface of the water. speed = m s–1 The diver in enters the water and decelerates. Describe and explain the variation of the viscous drag force acting on the diver in the water as he moves downwards. The diver has a volume of 7.5 × 10–2 m3 . The density of the water is 1.0 × 103 kg m–3 . Show that the upthrust acting on the diver when he is entirely underwater is 740 N. At a particular instant when the diver is entirely underwater his horizontal velocity is zero. The viscous drag force acting on him at this instant is 950 N vertically upwards. The diver has mass 78 kg. Determine the magnitude and direction of the acceleration of the diver. acceleration = m s–2 direction
2. Kinematics  →  2.1. Equations of motion
4. Forces, density and pressure  →  4.3. Density and pressure
Open
3
A thin metal wire X, of diameter 1.2 × 10–3 m, is used to suspend a model planet, as shown in . model planet wire X (not to scale) The variation with strain of the stress for wire X is shown in . 0.2 0.4 0.6 0.8 stress / GPa strain / 10–3 1.0 The strain in X is 5.4 × 10–3. Use to calculate the force exerted on the wire by the model planet. force = N The elastic potential energy of X is 0.31 J. Calculate the original length of the wire before the model planet was attached. original length = m Wire X is replaced by a new wire, Y, with the same original length and diameter but double the Young modulus of X. Wire Y also obeys Hooke’s law. On , draw a line representing the variation with strain of the stress for Y.
6. Deformation of solids  →  6.1. Stress and strain
Open
5
By reference to the direction of propagation of energy, state what is meant by a transverse wave. A space telescope is designed to detect electromagnetic radiation with wavelengths in the range 12 μm to 28 μm. State the region of the electromagnetic spectrum for this radiation. A detector on another space telescope detects an electromagnetic wave. The signal from the detector is transmitted to Earth and displayed on an oscilloscope as shown in . The frequency of the signal displayed on the oscilloscope is equal to the frequency of the detected electromagnetic wave. 1.0 cm 1.0 cm The time-base setting on the oscilloscope is 5.0 × 10–15 s cm–1. Calculate the wavelength of the detected electromagnetic wave. wavelength = m
7. Waves  →  7.4. Electromagnetic spectrum
7. Waves  →  7.1. Progressive waves
Open
6
Coherent visible light of a single frequency is incident normally on a double slit. This produces a pattern of bright and dark interference fringes on a screen, as illustrated in . 10.2 mm 3.1 m 1.2 mm light double slit fringe pattern on screen screen bright fringe X bright fringe Y dark fringe (not to scale) There are seven bright fringes. Explain how the pattern of bright and dark interference fringes is formed. The distance between the centres of bright fringe X and bright fringe Y in the pattern is 10.2 mm. The slit spacing is 1.2 mm. The distance from the slits to the screen is 3.1 m. Calculate the wavelength of the light incident on the slits. wavelength = m The light is replaced by different visible light with a shorter wavelength. State how the new fringe separation will compare to the original fringe separation. A stationary wave is formed on a stretched string AB, as shown in . B A R P Q string mean position of string P, Q and R are points on the string. On Fig. 6. 2, draw a cross (×) to show the position of a node. State the phase difference between P and Q. phase difference = ° State the phase difference between P and R. phase difference = °
8. Superposition  →  8.3. Interference
7. Waves  →  7.1. Progressive waves
Open
7
Define electric potential difference. A cell of electromotive force (e.m.f.) 1.8 V and internal resistance r is connected in parallel with a resistor of resistance 6.0 Ω and a filament lamp, as shown in . A 6.0 Ω S 1.8 V r The switch S is open. The ammeter reading is 0.25 A. Determine the internal resistance r of the cell. r = Ω At time t1 switch S in is closed. shows the variation with time t of the ammeter reading I. t1 t I State whether the e.m.f. of the cell after t1 is greater than, less than or the same as it was before t1. By considering the effect of the lamp on the total resistance of the circuit, explain the variation of the ammeter reading shown in .
10. D.C. circuits  →  10.1. Practical circuits
9. Electricity  →  9.3. Resistance and resistivity
Open
8
State the name of the class of fundamental particles that contains a neutrino. A hadron P has a charge of +1e, where e is the elementary charge. The hadron P is composed of a down antiquark and only one other quark. Identify a possible flavour for this other quark. State what type of hadron is P. Nucleus Q undergoes radioactive decay to form nucleus R, emitting an antineutrino and another particle X, as shown in the decay equation. Q R + X + ν State what particle is represented by X. Compare the nucleon numbers of Q and R. Compare the charges of Q and R.
11. Particle physics  →  11.2. Fundamental particles
11. Particle physics  →  11.1. Atoms, nuclei and radiation
Open