9702_w21_qp_21
A paper of Physics, 9702
Questions:
6
Year:
2021
Paper:
2
Variant:
1
Login to start this paper & get access to powerful tools
1
Define density. A smooth pebble, made from uniform rock, has the shape of an elongated sphere as shown in . r L The length of the pebble is L. The cross-section of the pebble, in the plane perpendicular to L, is circular with a maximum radius r. A student investigating the density of the rock makes measurements to determine the values of L, r and the mass M of the pebble as follows: L = (0.1242 ± 0.0001) m r = (0.0420 ± 0.0004) m M = (1.072 ± 0.001) kg. State the name of a measuring instrument suitable for making this measurement of L. Determine the percentage uncertainty in the measurement of r. percentage uncertainty = % The density ρ of the rock from which the pebble in is composed is given by ρ = Mr n kL where n is an integer and k is a constant, with no units, that is equal to 2.094. Use SI base units to show that n is equal to –2. Calculate the percentage uncertainty in ρ. percentage uncertainty = % Determine ρ with its absolute uncertainty. Give your values to the appropriate number of significant figures. ρ = ( ± ) kg m–3
1. Physical quantities and units  →  1.3. Errors and uncertainties
4. Forces, density and pressure  →  4.3. Density and pressure
Open
2
Define momentum. Two balls X and Y, of equal diameter but different masses 0.24 kg and 0.12 kg respectively, slide towards each other on a frictionless horizontal surface, as shown in . X Y mass 0.24 kg mass 0.12 kg frictionless surface 2.3 m s–1 2.3 m s–1 Both balls have initial speed 2.3 m s–1 before they collide with each other. shows the variation with time t of the force FY exerted on ball Y by ball X during the collision. – 400 –200 FY / N t / ms Calculate the kinetic energy of ball X before the collision. kinetic energy = J The area enclosed by the lines and the time axis in represents the change in momentum of ball Y during the collision. Determine the magnitude of the change in momentum of ball Y. change in momentum = N s Calculate the magnitude of the velocity of ball Y after the collision. velocity = m s–1 On , sketch the variation with time t of the force FX exerted on ball X by ball Y during the collision in . – 400 –200 FX / N t / ms
3. Dynamics  →  3.1. Momentum and Newton’s laws of motion
3. Dynamics  →  3.3. Linear momentum and its conservation
Open
3
A uniform metal bar, initially unstretched, has sides of length w, x and y, as shown in . w y x The bar is now stretched by a tensile force F applied to the shaded ends. The changes in the lengths x and y are negligible. The bar now has sides of length x, y and z, as shown in . z y x F F Determine expressions, in terms of some or all of F, w, x, y and z, for: the stress σ applied to the bar by the tensile force σ = the strain ε in the bar due to the tensile force ε = the Young modulus E of the metal from which the bar is made. E = A copper wire is stretched by a tensile force that gradually increases from 0 to 280 N. The variation with extension of the tensile force is shown in . force / N extension / mm State the maximum extension of the wire for which it obeys Hooke’s law. extension = mm Use to determine the strain energy in the wire when the tensile force is 120 N. strain energy = J Explain why the work done in stretching the wire to an extension of 12 mm is not equal to the energy recovered when the tensile force is removed.
6. Deformation of solids  →  6.1. Stress and strain
6. Deformation of solids  →  6.2. Elastic and plastic behaviour
Open
4
By reference to the direction of transfer of energy, state what is meant by a longitudinal wave. A vehicle travels at constant speed around a wide circular track. It continuously sounds its horn, which emits a single note of frequency 1.2 kHz. An observer is a large distance away from the track, as shown in the view from above in . vehicle direction of travel track observer (not to scale) shows the variation with time of the frequency f of the sound of the horn that is detected by the observer. The time taken for the vehicle to travel once around the track is T. 0.8 1.0 1.2 1.4 1.6 f / kHz time 3T T 2T Explain why the frequency of the sound detected by the observer is sometimes above and sometimes below 1.2 kHz. State the name of the phenomenon in . On , mark with a letter X the position of the vehicle when it emitted the sound that is detected at time T. On , mark with a letter Y the position of the vehicle when it emitted the sound that is detected at time 9T 4 . The speed of the sound in the air is 320 m s–1. Use to determine the speed of the vehicle in . speed = m s–1
7. Waves  →  7.1. Progressive waves
7. Waves  →  7.3. Doppler effect for sound waves
Open
5
State Kirchhoff’s first law. The circuit shown in contains a battery of electromotive force (e.m.f.) E and negligible internal resistance connected to four resistors R1, R2, R3 and R4, each of resistance R. E R2 R1 R4 2.4 V R3 0.30 A The current in R3 is 0.30 A and the potential difference (p.d.) across R4 is 2.4 V. Show that R is equal to 4.0 Ω. Determine the e.m.f. E of the battery. E = V The battery in is replaced with another battery of the same e.m.f. E but with an internal resistance that is not negligible. State and explain the change, if any, in the total power produced by the battery. The resistors in the circuit of are made from nichrome wire of uniform radius 240 μm. The length of this wire needed to make each resistor is 0.67 m. Calculate the resistivity of nichrome. resistivity = Ω m
10. D.C. circuits  →  10.2. Kirchhoff’s laws
10. D.C. circuits  →  10.1. Practical circuits
Open
6
Complete Table 6.1 to show the masses (in terms of the unified atomic mass unit u) and charges (in terms of the elementary charge e) of α, β+ and β– particles. Table 6.1 mass / u charge / e α-particle β+ particle β– particle Carbon-14 is radioactive and decays by emission of β– particles. Nuclei do not contain β– particles. Explain the origin of the β– particle that is emitted from the nucleus during β– decay. State the change in the quark composition of a carbon-14 nucleus when it emits a β– particle. Suggest why the β– particles are emitted with a range of different energies.
11. Particle physics  →  11.1. Atoms, nuclei and radiation
11. Particle physics  →  11.2. Fundamental particles
Open