0625_w11_qp_22
A paper of Physics, 0625
Questions:
12
Year:
2011
Paper:
2
Variant:
2
Login to start this paper & get access to powerful tools
2
Describe what is meant by an echo. shows the mouth of a river, viewed from above. A and B are on opposite banks, and are 800 m apart. A B 800 m Echo depth measurements use the time taken for sound to go from the surface to the river bed and back again. Such measurements give the following values for the depth of the water at different distances from A, along the line AB. distance from A / m depth of water / m 1.8 5.1 12.9 18.9 22.2 16.5 6.3 The speed of sound in water is 1500 m / s. Calculate how long a sound wave takes to travel from the surface to the bottom of the river at a point 300 m from A. time = s A ship has 3 m of itself below the surface of the water. From the figures in the table, estimate how close to A it can sail without hitting the bottom of the river. distance from A = m
3. Waves  →  3.1. General properties of waves
3. Waves  →  3.4. Sound
Open
3
State what is meant by the moment of a force. A warehouse worker is about to close a large door, as shown in . A B State, with a reason, which of the two positions, A or B, will enable him to close the door with least force. On another occasion, with the door in the position shown in , two workers each push on the door with the same force at the same time. One worker pushes at A, from the side seen in . The other worker pushes at B, from the other side of the door. Which way does the door move, if at all? Tick one box. the door closes the door opens the door remains as it is
1. Motion, forces and energy  →  1.5.2. Turning effect of forces
1. Motion, forces and energy  →  1.5.1. Effects of forces
Open
4
State what is meant by the term melting point. Some ice has all reached its melting point, and it begins to melt. What happens to the temperature of the ice as it melts? A certain substance has a melting point of –10 °C (minus 10 °C). A small amount of this substance is cooled from 50 °C to –18 °C in a very cold freezer unit. On , sketch a possible graph that shows how the temperature of the substance varies with time during the cooling process. –60 –40 –20 temperature / °C time
2. Thermal physics  →  2.2.3. Melting, boiling and evaporation
Open
5
The circuit in is connected, and the ammeter reading is noted as the water is heated. A X insulated connecting wires heat It is found that the ammeter reading increases as the temperature rises. State what happens to the resistance of component X as the temperature rises. Suggest what component X might be. This circuit is to be used as a thermometer. What must be done to calibrate it 1. at 0°C, 2. at 100 °C? The resistance of X does not vary linearly with temperature between 0 °C and 100 °C. How will this affect the use of this circuit as a thermometer?
4. Electricity and magnetism  →  4.2.4. Resistance
2. Thermal physics  →  2.2.2. Specific heat capacity
Open
6
In a laboratory optics experiment, a student stands a cylindrical converging lens on a large piece of paper and shines two parallel rays of light into it. This is shown in . P P P P Q Q parallel rays of light converging lens Q Q The student traces one of the rays using four pins, labelled P in . He traces the other ray using four more pins, labelled Q. Using a ruler, draw 1. the paths of the two rays in the air to the right of the lens, 2. the paths of the two rays as they pass through the lens. On , use the letter F to label the principal focus of the lens. shows part of the path of a ray of light through a glass block. The critical angle for the glass/air boundary is 42°. A B air ray of light glass block C State the name that describes what is happening to the ray 1. at A, 2. at B. On , draw the path of the ray after it has reached C.
3. Waves  →  3.2.3. Thin lenses
3. Waves  →  3.2.2. Refraction of light
Open
7
Plane waves travel on the surface of some water in a tank. shows the appearance, from above, of the waves before and after the boundary between two different depths of water in the tank. waves move this way boundary L R State what happens to the wavelength as the waves cross the boundary. Water waves travel more slowly when the water is shallower, but the frequency does not change. State, giving your reasons, which side of the boundary, L or R, has the deeper water. Some more water is poured into the tank, and waves of the same frequency as before are generated in the tank. What difference, if any, will this make to the appearance of the waves 1. to the left of the boundary, 2. to the right of the boundary?
3. Waves  →  3.1. General properties of waves
Open
8
Two charged metal spheres are placed next to each other. + indicates that the sphere is positively charged. – indicates that the sphere is negatively charged. In the box alongside each pair of spheres, write “attract” or “repel” or “no effect” to describe the effect the spheres have on each other. + – + + – – Water is flowing in a very narrow stream from a water tap . A negatively-charged plastic strip is held close to the stream of water, as shown in . tap negatively-charged plastic strip X water The stream of water moves towards the plastic strip. In terms of the water at the point labelled X, suggest why this happens.
4. Electricity and magnetism  →  4.2.1. Electric charge
5. Nuclear physics  →  5.1.1. The atom
Open
9
Two coils are wound on an iron rod, as shown in . One coil is connected to a cell and a switch. The other is connected to a sensitive centre-zero millivoltmeter. sensitive centre-zero millivoltmeter iron rod The open switch is now closed. State what happens to 1. the iron rod, 2. a small steel pin held close to one end of the iron rod, 3. the needle of the millivoltmeter. The switch is opened again. State what happens to the needle of the millivoltmeter. You are given an iron bar, a length of insulated wire, a battery and a variable resistor. You are to make an electromagnet whose strength can be varied. In the space below, draw a diagram of the electromagnet that includes the circuit. What is the setting of the variable resistor that gives the strongest magnetism of the electromagnet?
4. Electricity and magnetism  →  4.5.3. Magnetic effect of a current
4. Electricity and magnetism  →  4.1. Simple phenomena of magnetism
Open
10
The circuit in is connected. The potential difference across resistor R is measured as 8.0 V. A A A ammeter 2 ammeter 1 ammeter 3 current reading = 2.0 A 4.0 Ω R potential difference = 8.0 V What instrument is used to measure the potential difference across R? On , draw this instrument in position in the circuit, using the correct circuit symbol. The reading on ammeter 1 is 2.0 A. State the reading on ammeter 2, the reading on ammeter 3. Using the values on , calculate the resistance of R, resistance = Ω the total resistance of the circuit. total resistance = Ω State the value of the potential difference across the 4.0 Ω resistor. potential difference =
4. Electricity and magnetism  →  4.2.4. Resistance
4. Electricity and magnetism  →  4.3.3. Action and use of circuit components
Open
11
The count rate from a sample of radioactive material is measured every 20 minutes for 2 hours. The results, suitably corrected for background radiation, are shown in the table. time / s count rate counts / s Suggest one possible source for the background radiation. Name the two types of particle that the radioactive material might be emitting. 1. 2. From the table, without attempting a graph, estimate the half-life of the radioactive material. half-life = s A similar experiment is carried out, using a larger quantity of the same radioactive material. State what effect, if any, this has on the readings in the table, the half-life of the material. State one precaution that should be taken for safe handling of the radioactive material. Question 12 is on the next page.
5. Nuclear physics  →  5.2.1. Detection of radioactivity
5. Nuclear physics  →  5.2.4. Half-life
Open