0625_w11_qp_23
A paper of Physics, 0625
Questions:
12
Year:
2011
Paper:
2
Variant:
3
Login to start this paper & get access to powerful tools
3
shows a vertical strip made of springy metal, clamped at the top. clamp X Z Y metal strip The strip is moved from position Y to position X. The work done moving the strip is stored as energy in the strip. In which form is this energy? The strip is released from X and it initially oscillates between X and Z. In which position does the strip have maximum kinetic energy? As time progresses, the frequency of the oscillation remains the same but the amplitude becomes less. State what is meant by 1. frequency, 2. amplitude. What happens to the total energy of the strip as the amplitude decreases? When the oscillations eventually cease, in which position does the strip come to rest?
1. Motion, forces and energy  →  1.7.1. Energy
Open
4
Matter exists in three states: solid, liquid and gas. Steam is coming out of a kettle of boiling water. When the steam strikes a cold jug, it makes the jug wet. In which of the three states is the boiling water, the steam, the water on the jug? All of the following words are names of things that could happen during a change of state. boiling, condensation, evaporation, melting, solidification State which of these is used to describe what happens to the steam to make the jug wet. When the steam hits the jug, what happens to the energy stored in the steam?
2. Thermal physics  →  2.2.3. Melting, boiling and evaporation
2. Thermal physics  →  2.1.1. States of matter
Open
6
A boat is using echo-sounding equipment to measure the depth of the water underneath it, as illustrated in . The equipment in the boat sends a short pulse of sound downwards and detects the echo after a time interval of 0.80 s. Describe how an echo is caused. The speed of sound in water is 1500 m / s. Calculate the distance travelled by the sound in 0.80 s. distance travelled = m State the depth of water under the boat. depth = m The boat is sailing away from the shore. The depth of water increases uniformly with distance from the shore. On , sketch a graph that shows how the time interval to hear the echo might change as the distance from the shore changes. distance from shore time interval to hear echo
3. Waves  →  3.1. General properties of waves
3. Waves  →  3.4. Sound
Open
7
shows a point object P above a horizontal plane mirror. plane mirror object P eye On , mark and label the position of the image of P, draw a line showing how a ray of light travels from the object to the eye. A boy carefully writes HE CHECKED HIS BOOK on a piece of graph paper. He lays the paper on the table and then positions a vertical mirror as shown in . vertical mirror HE CHECKED HIS BOOK Which word of the reflection of the sentence in the mirror looks different from that written on the paper? The two prisms shown in are made of glass. A ray of red light enters each prism from the air, as shown. 60° 30° ray of red light 45° 45° ray of red light The critical angle for red light at the glass-air boundary is 42°. On , complete the paths of the rays through the prisms and out into the air again.
3. Waves  →  3.2.1. Reflection of light
3. Waves  →  3.2.2. Refraction of light
Open
8
A student tests to see whether certain materials conduct electricity. He uses the circuit in and connects the materials in turn in the gap between P and Q. A 6 V battery P Q X What is the purpose of component X in the circuit? State how the student can tell if a certain material conducts electricity. Which of the following materials is a good conductor of electricity? Put a tick alongside each material that is a good conductor. copper glass iron nylon perspex The student now connects a small heater in the gap in the circuit, as shown in . He wishes to determine the resistance of the heater. A 6 V battery heater X What other meter must he connect in the circuit, in order to determine the resistance? On , draw this meter in the correct position in the circuit. shows a radiant electric fire with 3 heating elements, each of which operates at full temperature when 250 V is connected across it. shows an incomplete circuit diagram of the fire. There are 2 switches. The top switch controls one heating element and the bottom switch controls two heating elements connected in parallel. 250 V a.c. Complete , showing all the electrical connections. The current in one heating element is 2.5 A when it is connected to the 250 V supply. Calculate the resistance of the heating element. resistance = All three heating elements are switched on. Which statement about the total resistance of the electric fire is correct? Tick one box. no resistance smaller resistance than in same resistance as in larger resistance than in
4. Electricity and magnetism  →  4.2.4. Resistance
4. Electricity and magnetism  →  4.3.2. Series and parallel circuits
Open
9
A girl has two metal bars, 1 and 2. When the girl holds one end of bar 1 near a magnet, she finds that it attracts both the N pole and the S pole of the magnet. What does this tell you about bar 1? When the girl holds one end of bar 2 near the magnet, it attracts the N pole of the magnet, but repels the S pole. What does this tell you about bar 2? In another experiment, the girl uses two table-tennis balls A and B. Each is coated with a thin layer of conducting material. Ball A is mounted on an insulating stand and ball B is suspended from a thin nylon thread. The arrangement is shown in . A B Ball A is given a negative charge, and is slowly moved towards ball B until it touches. Predict what is seen to happen.
4. Electricity and magnetism  →  4.1. Simple phenomena of magnetism
Open
10
A coil P is joined to a battery and a switch S. A similar coil Q is joined to a sensitive centre-zero millivoltmeter G. P and Q are placed end to end, as shown in . S P Q G Describe what is seen happening to the reading of G as switch S is closed, as switch S is opened again. A soft iron bar, as long as the combined lengths of P and Q, is placed inside P and Q. State what difference this makes to what is observed on G as S is closed. The bar in is removed and the battery is changed for one with a smaller e.m.f. State what difference this makes to what is observed on G as S is closed. The battery is replaced by an a.c. power supply of frequency 50 cycles per second, and then S is closed. Describe what is seen on G.
4. Electricity and magnetism  →  4.5.3. Magnetic effect of a current
4. Electricity and magnetism  →  4.5.2. The a.c. generator
Open
11
The counter in records the total number of times that a radiation is detected whilst the counter is switched on. TENS UNITS ON OFF HUNDREDS counter radiation detector X • With no radioactive source present, the counter is set to zero and then switched on for 4 minutes. After this time, the counter reads: What radiation is the apparatus detecting? Calculate the average count rate of this radiation. count rate = counts / min Point X is 25 cm from the radiation detector. A source that is known to be highly radioactive is placed at X. The counter is reset to zero, and the count again taken for 4 minutes. The counter now reads: State what type of radiation is being emitted by the source. The source is moved to a position 2 cm from the detector. The counter is set to zero and restarted. The counter reading after counting for 4 minutes is: Estimate the count rate due to the radioactive source alone. count rate = counts / min Question 12 is on the next page.
5. Nuclear physics  →  5.2.1. Detection of radioactivity
Open
12
represents a neutral lithium atom. All the particles in the atom are shown on the diagram. orbit nucleus Use to help you answer the following questions. How many electrons does this atom have? What is the value of the proton number of this atom? How many neutrons does the atom have? What is the value of the nucleon number of this atom? Write the appropriate numbers in the boxes below, to represent this atom of Lithium in nuclide notation. Li
5. Nuclear physics  →  5.1.2. The nucleus
5. Nuclear physics  →  5.1.1. The atom
Open