0625_s14_qp_32
A paper of Physics, 0625
Questions:
11
Year:
2014
Paper:
3
Variant:
2
Login to start this paper & get access to powerful tools
2
A surveyor measures the dimensions of a room of constant height. is a top view of the room and shows the measurements taken. 6.01 m 4.25 m 3.26 m 6.75 m State an instrument that would be suitable to take these measurements. The volume of air in the room is 76.4 m3. The density of the air is 1.2 kg / m3. Calculate the mass of air in the room. mass = A window in the room is open. The next day, the temperature of the room has increased, but the pressure of the air has stayed the same. State and explain what has happened to the mass of air in the room.
2. Thermal physics  →  2.1.3. Gases and the absolute scale of temperature
3. Waves  →  3.4. Sound
Open
3
When a salmon swims up a river to breed, it often has to jump up waterfalls. shows a salmon jumping above the surface of the water. On this occasion the salmon falls back down into the river. salmon waterfall river The salmon has a mass of 2.0 kg. The salmon leaves the water vertically with a kinetic energy of 16.2 J. Calculate the speed of the salmon as it leaves the water. speed = Calculate the maximum height gained by the salmon. Ignore air resistance. gain in height = After the salmon has re-entered the river, it has lost nearly all its original kinetic energy. State what has happened to the lost energy. Another salmon, of much greater mass, leaves the water vertically with the same speed. State and explain how the height of this salmon’s jump compares to the height reached by the first salmon.
1. Motion, forces and energy  →  1.7.1. Energy
Open
4
Define the specific heat capacity of a substance. shows a cylinder of aluminium heated by an electric heater. electric heater aluminium cylinder thermometer C.I.E. Power Pack V – + The mass of the cylinder is 800 g. The heater delivers 8700 J of thermal energy to the cylinder and the temperature of the cylinder increases by 12 °C. Calculate a value for the specific heat capacity of aluminium. specific heat capacity = Calculate the thermal capacity (heat capacity) of the aluminium cylinder. thermal capacity = State and explain a method of improving the accuracy of the experiment.
2. Thermal physics  →  2.2.2. Specific heat capacity
Open
5
Puddles of water form on a path after rainfall on a windy day. In terms of molecules, state and explain how the rate of evaporation of the puddles is affected by a reduction of wind speed, an increase of water temperature. shows two puddles. large puddle small puddle State and explain how the rate of evaporation from the large puddle compares to that from the small puddle under the same conditions. Describe an experiment to demonstrate the difference between good and bad emitters of infra-red radiation. You may include a diagram to help your description. State what readings should be taken.
2. Thermal physics  →  2.2.3. Melting, boiling and evaporation
2. Thermal physics  →  2.3.3. Radiation
Open
6
shows a ray of light incident on the surface of a glass block. On , accurately draw the reflected ray. shows a ray of light incident on a glass prism. w x y z u v Put one tick only in each line of the table to indicate which of the angles labelled in are the angle of incidence and the angle of refraction. u v w x y z angle of incidence angle of refraction The refractive index of water is 1.33. A ray of light passes from water into air. The angle of incidence at the water-air interface is 30 °. Calculate the angle of refraction. angle of refraction = shows rays of violet and red light incident on a prism. The dashed line shows the path taken by the ray of violet light in the prism. path of rays of violet and red light On , draw and label the path that the ray of red light takes in the prism. A calculation is not required.
3. Waves  →  3.2.1. Reflection of light
3. Waves  →  3.2.2. Refraction of light
Open
7
A solenoid connected to a battery produces a magnetic field. The wires are then connected to the battery terminals the other way round. Tick one box in the table to indicate the effect on the magnetic field. decreases but not to zero decreases to zero reverses direction increases stays the same shows a top view of two bar magnets and a vertical rigid conducting rod carrying a current. The direction of the current in the rod is coming out of the paper. S N S N vertical rod perpendicular to paper On , draw a single line with an arrow to show the direction of the magnetic field due to the bar magnets at the position of the rod. State the direction of the force exerted on the vertical rod. The rod has a mass of 350 g and the resultant force acting on the rod is 0.21 N. The rod is free to move. Calculate the initial acceleration of the rod. acceleration =
4. Electricity and magnetism  →  4.5.3. Magnetic effect of a current
4. Electricity and magnetism  →  4.5.4. Force on a current-carrying conductor
Open
9
shows a positively charged plastic rod, a metal block resting on an insulator, and a wire connected to earth. positively charged plastic rod metal block wire connected to earth insulator On , draw the charge distribution in the metal block. The earth wire is held against the metal block, as shown in . positively charged plastic rod metal block wire connected to earth insulator On , draw the new charge distribution. The charged rod and the earth wire are removed and the metal block is left charged. State the order in which the rod and the wire were removed. Explain your answer. Name this charging process.
4. Electricity and magnetism  →  4.2.1. Electric charge
Open
10
shows a digital logic circuit, not using the recognised symbols. AND gate OR gate D output E input A input B input C Complete the table below to indicate the logic levels of points D and E in the circuit, when points A, B and C are at the logic levels indicated. 0 represents low or off. 1 represents high or on. A B C D E Draw the recognised symbol for an AND gate. A NAND gate can be replaced by an AND gate and a NOT gate. Draw a diagram to show how the AND gate and the NOT gate should be connected. Label clearly the logic gates and any input or output.
4. Electricity and magnetism  →  4.3.1. Circuit diagrams and circuit components
4. Electricity and magnetism  →  4.3.3. Action and use of circuit components
Open
11
shows a beam of radiation that contains α-particles, β-particles and γ-rays. The beam enters a very strong electric field between charged plates in a vacuum. plate at positive voltage plate at negative voltage beam of radiation Indicate the deflection, if any, of the α-particles, β-particles and γ-rays, by placing one tick in each column of the table. possible deflection α-particles β-particles γ-rays no deflection towards positive plate towards negative plate out of the paper into the paper The radiation is said to be ionising. Explain what this means. α-particles are more strongly ionising and have a shorter range in air than γ-rays. Use your knowledge of the nature of these radiations to explain these differences.
5. Nuclear physics  →  5.2.2. The three types of nuclear emission
5. Nuclear physics  →  5.2.3. Radioactive decay
Open