---

---

1

shows an electrically powered bicycle. battery electric motor When fully charged, the battery can deliver a power of 600 W for 60 min. Calculate the energy, in joules, stored in the battery when fully charged. energy = J State the form of energy stored by the battery. The bicycle has a motor with an electrical input power of 250 W. Calculate the time for which the battery can power the bicycle. time = Consider this bicycle compared to a small motorcycle. State two environmental benefits of the electrically powered bicycle. 1. 2.

4. Electricity and magnetism  →  4.2.5. Electrical energy and electrical power

Open

2

shows an object of mass 2.0 kg on a bench. This object is connected by a cord, passing over a pulley, to an object of mass 3.0 kg. 3.0 kg object 2.0 kg object 2.0 cm card cord pulley F bench The 2.0 kg object is released from rest and accelerates at 4.0 m / s2. Calculate the resultant force acting on the 2.0 kg object. force = Calculate the upward force F exerted by the cord on the 3.0 kg object. force F = The objects have a constant acceleration. Show that the speed of the objects 0.80 s after release is 3.2 m / s. A card, of width 2.0 cm, is fixed to the 2.0 kg object. As the 2.0 kg object moves to the left, the card passes through a beam of light that is perpendicular to the card. Using the speed given in , calculate the time taken for the card to pass through the beam of light. time =

1. Motion, forces and energy  →  1.5.1. Effects of forces

1. Motion, forces and energy  →  1.2. Motion

Open

3

shows water in a river moving parallel to the river bank at 4.0 m / s and a canoe travelling in the river. 38° river bank river bank canoe travels at 2.5 m / s relative to the water water moving at 4.0 m / s The canoe travels at 2.5 m / s relative to the water and heads at an angle of 38° to the river bank. Draw a scale diagram to determine the canoe’s resultant velocity and state the scale you used. scale magnitude of resultant velocity direction of resultant velocity (angle from the river bank) The mass of the canoeist is 65 kg. Calculate her kinetic energy when travelling on still water at 2.5 m / s. energy =

1. Motion, forces and energy  →  1.6. Momentum

1. Motion, forces and energy  →  1.7.1. Energy

Open

4

State and explain the two features of a liquid-in-glass thermometer that are necessary for linearity. statement 1 explanation statement 2 explanation The value of the heat capacity of the hot junction of a thermocouple thermometer is important in ensuring that it can measure temperature changes very rapidly. Explain why. The hot junction of a thermocouple thermometer has a heat capacity of 0.11 J / °C. Calculate the thermal energy required to increase the temperature of the hot junction from 20 °C to 345 °C. energy =

2. Thermal physics  →  2.2.2. Specific heat capacity

Open

5

Sound waves are longitudinal and electromagnetic waves are transverse. A sound wave used for a medical examination has a frequency of 1.5 MHz. State and explain what type of sound wave this is. The wave travels through soft human tissue at a speed of 1.3 km / s. Calculate the wavelength of the wave in soft human tissue. wavelength = Describe one use of X-rays in medicine.

3. Waves  →  3.1. General properties of waves

3. Waves  →  3.4. Sound

Open

6

is a full-size ray diagram showing the formation of an image by a thin glass lens. (full size) Determine the focal length of the lens. focal length = Circle three items in the list which describe the nature of the image formed. enlarged same size diminished inverted upright real virtual State one feature of a virtual image.

3. Waves  →  3.2.3. Thin lenses

Open

7

shows a small plotting compass which is aligned with the magnetic field between magnetic poles A and B of a U-shaped magnet. S A B N State the polarity of the poles. pole A pole B shows a wire, placed between two poles, carrying a current in the direction of the arrow. S N On , draw an arrow to show the direction of the force on the wire due to the magnetic field. shows a β-particle moving in the direction of the arrow between the same two poles. S β N -particle direction of travel of β-particle when in the position shown On , draw an arrow to show the direction of the force on the β-particle due to the magnetic field.

4. Electricity and magnetism  →  4.1. Simple phenomena of magnetism

4. Electricity and magnetism  →  4.5.4. Force on a current-carrying conductor

Open

8

shows how the electromotive force (e.m.f.) of a 60 Hz alternating current (a.c.) power supply varies with time. time period e.m.f. time Calculate the time period of the a.c. time period = shows this power supply connected in a circuit. A B C State the name of component A. In each time period of the a.c., 1.5 × 1017 electrons pass through component A. The charge on an electron is 1.6 × 10–19 C. Calculate the average current in the circuit during one time period. current = On : 1. mark, with an arrow labelled E, the direction of the electron flow through component B 2. mark, with an arrow labelled I, the direction of the conventional current in component C. A B C shows a circuit with components B and C connected to a direct current (d.c.) power supply of e.m.f. 12 V. B C The current in the circuit is 0.35 A. Calculate the power delivered by the power supply to the circuit. power =

4. Electricity and magnetism  →  4.2.2. Electric current

Open

9

shows a circuit with a 3-position switch. A C 12 V B Y X M The moving part of the switch is always connected to point Y around which it pivots. The other end of the moving part, labelled X, can be connected to one of the points A, B or C. The resistance of the motor is 2.0 Ω and the resistance of the resistor is 3.0 Ω. Determine the current in the motor when the switch is connected to: point A current = point B current = point C. current = Two resistors of resistance 2.0 Ω and 3.0 Ω are connected in parallel. Calculate the combined resistance of the resistors in this arrangement. resistance =

4. Electricity and magnetism  →  4.3.2. Series and parallel circuits

Open

10

is a simplified diagram of a digital circuit. The output of logic gate Y controls a buzzer. input A input B logic gate X logic gate Y Complete Table 10.1, the truth table for the circuit. Table 10.1 input A input B output of X output of Y Input A is the output of a humidity sensor which gives logic 1 when the humidity is high and logic 0 when the humidity is low. Input B is the output of a light sensor which gives logic 1 in bright light and logic 0 in darkness. The buzzer sounds when the output of Y is logic 1. State the conditions of humidity and light when the buzzer is on. The output of the digital circuit alone is not able to operate the buzzer. Ring the component from the list that must be connected between the output of the digital circuit and the buzzer. fuse heater relay resistor thermistor Explain your answer.

4. Electricity and magnetism  →  4.3.1. Circuit diagrams and circuit components

4. Electricity and magnetism  →  4.3.3. Action and use of circuit components

Open

11

shows the paths of three α-particles moving towards a thin gold foil. Four gold nuclei are shown. paths of α-particles gold nuclei (not to scale) On , complete the paths of the three α-particles. State the sign of the charge on the α-particles. The nuclide notation for a nucleus of gold-198 is 198 79Au. State the numbers of electrons, neutrons and protons in a neutral atom of gold-198. number of electrons = number of neutrons = number of protons =

5. Nuclear physics  →  5.1.2. The nucleus

5. Nuclear physics  →  5.1.1. The atom

Open