0625_w18_qp_43
A paper of Physics, 0625
Questions:
10
Year:
2018
Paper:
4
Variant:
3
Login to start this paper & get access to powerful tools
1
is the distance-time graph for a moving car. time t / s distance / m On , mark a point P where the acceleration of the car is zero. Determine: the speed of the car at time t = 15 s speed = the average speed of the car between time t = 30 s and time t = 45 s. average speed = At time t = 45 s, the car starts to decelerate. At time t = 55 s and at a distance of 400 m from the starting point, the car stops. It then remains stationary for 5.0 s. On , draw a possible continuation of the distance-time graph.
1. Motion, forces and energy  →  1.2. Motion
Open
2
Complete by writing in the right-hand column the name of the quantity given by the product in the left-hand column. product quantity mass × acceleration force × time shows a man hitting a ball with a golf club. golf club ball The ball has a mass of 0.046 kg. The golf club is in contact with the ball for 5.0 × 10–4 s and the ball leaves the golf club at a speed of 65 m / s. Calculate: 1. the momentum of the ball as it leaves the golf club momentum = 2. the average resultant force acting on the ball while it is in contact with the golf club. average force = While the golf club is in contact with the ball, the ball becomes compressed and changes shape. State the type of energy stored in the ball during its contact with the golf club.
1. Motion, forces and energy  →  1.6. Momentum
Open
3
The density of mercury is 1.4 × 104 kg / m3. shows an instrument that is being used to determine the atmospheric pressure. 760 mm space A mercury (not to scale) State the name of the instrument. State what is in space A. Calculate the atmospheric pressure. atmospheric pressure = shows mercury stored in a cylindrical glass jar of internal radius 4.0 cm. The depth of mercury in the jar is 12 cm. 12 cm 8.0 cm mercury (not to scale) Calculate the weight of mercury in the jar. weight =
1. Motion, forces and energy  →  1.8. Pressure
1. Motion, forces and energy  →  1.4. Density
Open
5
A student is supplied with a small block of iron, a thermometer and an electrical heater of power P. There are two holes drilled in the iron block. The heater fits tightly into one hole and the student places the thermometer into the other hole. shows the equipment. cable heater iron block thermometer The student uses this equipment when determining the specific heat capacity of iron. State: • the other equipment the student will need • the measurements the student needs to take • the equation used when calculating the value of the specific heat capacity of iron. In the student’s home there is a wood-burning stove, which is also made of iron. The mass of the wood-burning stove is 85 kg. State what is meant by the thermal capacity of an object. The specific heat capacity of iron is 460 J / (kg °C). Calculate the thermal capacity of the wood-burning stove. thermal capacity =
2. Thermal physics  →  2.2.2. Specific heat capacity
Open
6
shows white light incident at point X on a glass prism. prism screen ray of white light X From point X on , draw a ray of red light, labelled R and a ray of violet light, labelled V, to show how a spectrum is formed on the screen. State the colour of light in the visible spectrum with the shortest wavelength. The critical angle for a type of glass is 42°. and show two prisms ABC and PQR made of this type of glass. A ray of monochromatic red light passes into each of the prisms. normal normal P Q C B A R Y 60° 60° 45° 45° State what is meant by monochromatic light. Describe and explain what happens to the ray of light in as it strikes side AC of the prism. Describe and explain what happens to the ray of light in as it strikes the glass at point Y.
3. Waves  →  3.2.4. Dispersion of light
3. Waves  →  3.2.1. Reflection of light
Open
7
A defibrillator is a machine that sends an electrical charge through the heart of a patient whose heart is not beating correctly. Doctors learn to use a defibrillator by practising on a medical dummy. shows the two contacts of a defibrillator attached to a medical dummy. medical dummy defibrillator contacts The contacts that touch the dummy are made from metal, and when the defibrillator is being used, one contact becomes strongly negatively charged and the other contact becomes strongly positively charged. The handles of the contacts are made from plastic, which is an electrical insulator. State how the structure of an electrical insulator differs from the structure of a conductor. Suggest why the handles are made from an electrical insulator. Explain, in terms of the particles involved, how one contact becomes negatively charged and how the other contact becomes positively charged. The defibrillator passes a charge of 9.1 × 10–3 C through the medical dummy in 6.5 × 10–4 s. Calculate the average current in the dummy. current =
4. Electricity and magnetism  →  4.2.1. Electric charge
4. Electricity and magnetism  →  4.4. Electrical safety
4. Electricity and magnetism  →  4.3.3. Action and use of circuit components
Open
8
A 9.0 V battery is connected to a 120 Ω resistor in series with wire P. shows a voltmeter connected across the 120 Ω resistor. 9.0 V 120 Ω V P State the energy changes that are taking place in the circuit. The reading on the voltmeter is 2.4 V. Calculate: the current in the 120 Ω resistor current = the potential difference (p.d.) across wire P p.d. = the resistance of wire P. resistance = Wire P has a diameter d and a length l. A second piece of wire Q is made of the same material as P. The diameter of wire Q is 0.50 × d and its length is 5.0 × l. Calculate the resistance of wire Q. resistance =
4. Electricity and magnetism  →  4.2.4. Resistance
4. Electricity and magnetism  →  4.3.2. Series and parallel circuits
Open
9
Describe how a direct current (d.c.) differs from an alternating current (a.c.). shows how the voltage output of an a.c. generator varies with time. 2.0 0.4 0.6 0.8 1.0 4.0 voltage / V time / s 6.0 8.0 –8.0 –6.0 –4.0 –2.0 0.2 time / s 1.2 1.2 1.0 0.8 0.4 0.6 0.2 A heater is connected directly to the a.c. generator and the maximum current in the heater is 0.75 A. On , sketch a graph to indicate how the current in the heater varies with time. 0.25 0.4 0.6 0.8 1.0 0.50 current / A time / s 0.75 1.00 –1.00 –0.75 –0.50 –0.25 0.2 time / s 1.2 1.2 1.0 0.8 0.4 0.6 0.2 Calculate the power produced by the heater when the current is 0.75 A. power = shows the coil ABCD of the a.c. generator between two magnetic poles. A D B C rotation direction N S On , draw a straight arrow to indicate the direction in which side AB of the coil is moving. Label this arrow M. Deduce the direction of the current induced in side AB of the coil and explain your reasoning. The rate at which the coil of the a.c. generator rotates increases. State two ways in which the alternating voltage changes. 1. 2.
4. Electricity and magnetism  →  4.5.2. The a.c. generator
4. Electricity and magnetism  →  4.5.5. The d.c. motor
4. Electricity and magnetism  →  4.2.2. Electric current
Open
10
Thorium-234 (23 0Th) is radioactive. It decays by β-emission to form an isotope of protactinium (Pa). Complete the nuclide equation for this decay. 0Th Pa + β A pure sample of thorium-234 emits β-particles at a count rate of 2480 counts / second. The half-life of thorium-234 is 24 days. Calculate the count rate for the emission of β-particles from the thorium in the sample after 72 days have passed. count rate The isotope of protactinium in is also radioactive. It decays by β-emission and has a half-life of 70 seconds. State and explain how this would affect the observed count rate for the sample in after 72 days.
5. Nuclear physics  →  5.2.3. Radioactive decay
5. Nuclear physics  →  5.2.1. Detection of radioactivity
Open