0625_s23_qp_32
A paper of Physics, 0625
Questions:
11
Year:
2023
Paper:
3
Variant:
2
Login to start this paper & get access to powerful tools
1
A student measures the diameter of some identical steel balls. shows the arrangement she uses. cm A B steel balls diameter wooden block (not to scale) Using the ruler in , determine the distance AB on . distance AB = cm Use the distance AB to determine the diameter of one steel ball. diameter of one steel ball = cm The mass of some steel balls is 54 g and the total volume of these steel balls is 6.9 cm3. Calculate the density of the steel. density of steel = g / cm3
1. Motion, forces and energy  →  1.4. Density
1. Motion, forces and energy  →  1.1. Physical quantities and measurement techniques
Open
2
shows the speed–time graph for a cyclist. speed m / s time / s S T W X Y Z In , the sections ST, TW, WX, XY and YZ indicate stages of the cyclist’s journey. State one section which shows the cyclist moving with: constant speed constant deceleration constant non-zero acceleration. Calculate the distance travelled by the cyclist in section ST. distance travelled = m shows the horizontal forces on a cyclist. 220 N 160 N Calculate the size of the resultant force on the cyclist. resultant force = N State the effect, if any, of the resultant force on the motion of the cyclist.
1. Motion, forces and energy  →  1.2. Motion
Open
3
A student has a battery-powered torch. shows the torch. base of torch shows the energy transfers when the torch is switched on. The diagram is incomplete. energy store electrical working 100 J energy thermal energy store 70 J J Show the energy transfers in the torch by completing the labels on . The weight of the torch is 8.5 N. The student lifts the torch a vertical distance of 0.80 m to place it on a shelf. Calculate the work done on the torch by the student. work done = J The student places the torch on its base on a shelf. The area of the base of the torch is 44 cm2. The weight of the torch is 8.5 N. Calculate the pressure on the shelf due to the torch. pressure on shelf = N / cm2
1. Motion, forces and energy  →  1.7.2. Work
1. Motion, forces and energy  →  1.7.1. Energy
1. Motion, forces and energy  →  1.7.4. Power
Open
4
A student has a block of solid metal at room temperature. Describe the arrangement, separation and motion of the particles in the solid metal. The student cools the block of metal in a freezer. State the effect, if any, of cooling on the kinetic energy of the particles in the block of metal. State the name of the temperature at which particles have the least kinetic energy. State the value of temperature at which particles have the least kinetic energy. Include the unit. The metal block emits thermal radiation from its surface. State two features of a surface that is a good emitter of thermal radiation.
2. Thermal physics  →  2.2.1. Thermal expansion of solids, liquids and gases
2. Thermal physics  →  2.1.2. Particle model
2. Thermal physics  →  2.2.3. Melting, boiling and evaporation
Open
5
An observer stands at P and looks into a rock quarry. A small explosion takes place at X in the quarry. shows the situation. DANGER – BLASTING P X Y Z rock quarry small explosion solid rock (not to scale) The observer first hears the sound from the explosion 1.8 s after the explosion occurs. The speed of the sound is 340 m / s. Calculate the distance XP from the explosion at X to the observer at P. distance XP = m The observer then hears a quieter sound from the explosion. Suggest how the quieter sound waves reach the observer. Before the explosion, a warning siren produces a sound. The wavelength of the sound is 0.28 m. The speed of the sound is 340 m / s. Calculate the frequency of the sound. frequency = Hz
3. Waves  →  3.4. Sound
Open
6
shows light waves passing from air into a glass block. glass air wavefronts (not to scale) State the name of the process shown in as the wavefronts enter the glass block. State two changes in the light waves as they pass from air into glass. shows a ray of red light travelling through a glass fibre. The glass fibre is made of solid glass. air glass ray of red light air State and explain how the ray of red light travels through the glass fibre as shown in .
3. Waves  →  3.2.4. Dispersion of light
3. Waves  →  3.2.2. Refraction of light
Open
7
A student uses a permanent magnet to lift some unmagnetised nails. Some of the nails are made of iron and some are made of steel. shows the magnet lifting the nails. N S magnet steel nails iron nails Each nail lifts the nail below it by induced magnetism. Describe what is meant by induced magnetism. The student leaves the nails attached to the magnet for several hours, then removes the magnet. State a difference between a magnetic property of the iron nails and of the steel nails. A metal wire XY is connected to a voltmeter. The wire is placed between the poles of a permanent magnet. shows the arrangement. N S X Y movement voltmeter V State the reading on the voltmeter when the wire is stationary between the poles. Give a reason for the reading on the voltmeter when the wire is moving in the direction shown in .
4. Electricity and magnetism  →  4.1. Simple phenomena of magnetism
Open
8
A student uses the circuit in to measure the resistance of the heater in the circuit. heater variable resistor The symbols for the meters in are incomplete. Complete the symbols for the two meters by writing in the circles in . The current in the heater is 1.4 A and the potential difference (p.d.) across the heater is 8.0 V. Calculate the resistance of the heater. resistance = Ω The heater is switched on for 30 s. The current in the heater is 1.4 A and the p.d. across it is 8.0 V. Calculate the electrical energy transferred by the heater during the 30 s. energy transferred = J
4. Electricity and magnetism  →  4.2.4. Resistance
4. Electricity and magnetism  →  4.2.5. Electrical energy and electrical power
Open
9
A student has a desktop computer that connects to the 240 V a.c. mains electrical supply. shows the desktop computer. desktop computer The desktop computer has an on-off switch in one of the wires that connect it to the mains supply. State and explain which wire includes the switch. The desktop computer uses a transformer to change the 240 V a.c. voltage to a 12 V a.c. voltage. State the name of this type of transformer. Describe the construction of this transformer. You may include a labelled diagram.
4. Electricity and magnetism  →  4.5.6. The transformer
4. Electricity and magnetism  →  4.4. Electrical safety
Open
10
Iodine-131 is a radioactive isotope of the element iodine. shows the nuclide notation for a nucleus of iodine-131. 53 I Determine the number of protons in one nucleus of iodine-131. number of protons = Determine the number of neutrons in one nucleus of iodine-131. number of neutrons = When a nucleus of iodine-131 decays, it emits a beta (β)-particle and a gamma (γ) ray. State the nature of a beta-particle and a gamma ray. A beta-particle is A gamma ray is A sample contains 1.6 mg of iodine-131. The half-life of iodine-131 is 8.0 days. Calculate the mass of iodine-131 remaining in the sample after 24.0 days. mass of iodine-131 remaining = mg
5. Nuclear physics  →  5.2.3. Radioactive decay
5. Nuclear physics  →  5.1.2. The nucleus
Open