0625_w20_qp_31
A paper of Physics, 0625
Questions:
12
Year:
2020
Paper:
3
Variant:
1
Login to start this paper & get access to powerful tools
1
Student P and student Q run in a 100 m race. shows the distance–time graph for each student during the race. 2.0 Key 4.0 6.0 8.0 10.0 12.0 time / s distance / m student P student Q Determine the time taken for student Q to run 100 m. time = s Determine the distance between the two students as Q reaches 100 m. distance = m Calculate the average speed of student Q during the 100 m race. average speed = m / s State which student has the faster speed between 3.0 s and 6.0 s. Explain how allows you to compare speeds without calculation.
1. Motion, forces and energy  →  1.2. Motion
Open
3
shows three horizontal forces acting on a car as it moves along a straight road. The horizontal forces act along the same straight line. 900 N 300 N 250 N Calculate the size of the resultant horizontal force on the car and state its direction. size of resultant force = N direction of resultant force The driver presses the brake pedal and the car slows down. As the car slows down, the kinetic energy of the car decreases by 100 kJ. Describe and explain what happens to this 100 kJ of energy. shows the force applied to the brake pedal by the driver’s foot. pivot brake pedal 35 N 20 cm Calculate the moment of the force about the pivot. Include the unit. moment = unit
1. Motion, forces and energy  →  1.5.1. Effects of forces
1. Motion, forces and energy  →  1.5.2. Turning effect of forces
Open
4
Electrical energy is provided to homes and industry from a coal-fired power station. The main stages in the operation of a coal-fired power station are listed below. They are not in the correct order. A The boiler produces steam. B The turbine turns a generator. C Thermal energy transfers to water in a boiler. D Chemical energy in coal transfers to thermal energy. E The generator produces electrical energy. F Steam turns a turbine. G Coal burns in a furnace. Complete the flow chart to describe how a coal-fired power station works. Insert the missing letters in the empty boxes. G C F Some people are against the use of coal-fired power stations. Give two environmental problems caused by coal-fired power stations. 1. 2. In the power station, a conveyor belt lifts coal from a coal supply to a furnace. An electric motor moves the conveyor belt. shows this arrangement. coal supply conveyor belt coal input to furnace The speed of the electric motor increases and the coal supply rate is increased. The conveyor belt lifts more coal each second. State the effect, if any, of increasing the motor speed on: the work done on each kilogram of coal the output power of the motor.
1. Motion, forces and energy  →  1.7.3. Energy resources
2. Thermal physics  →  2.3.4. Consequences of thermal energy transfer
Open
5
shows a steel container fitted with a liquid manometer. There is a gas in the container. steel container sealed lid mercury liquid manometer 100 mm gas bench The area of the steel container in contact with the bench is 80 cm2. The total weight of the steel container and its contents is 60 N. Calculate the pressure that the steel container exerts on the bench. pressure on the bench = N / cm2 Atmospheric pressure is equal to 760 mm of mercury (mm Hg). Determine the pressure inside the container in mm Hg. pressure = mm Hg The temperature of the gas inside the steel container decreases. State and explain how the pressure of the gas changes as the temperature of the gas decreases. Use your ideas about molecules in your answer.
1. Motion, forces and energy  →  1.8. Pressure
2. Thermal physics  →  2.1.3. Gases and the absolute scale of temperature
Open
6
represents three changes of state. Each pair of diagrams A, B and C shows the arrangement of molecules in a substance before and after it changes state. before A B C after Give the term used for each change of state. A B C A student attaches a liquid-in-glass thermometer to a ruler. The thermometer does not have a marked scale. shows the arrangement. ruler thermometer mercury level cm The student places the thermometer in steam. The mercury rises to 11 cm on the ruler. The student places the thermometer in melting ice. The mercury decreases to 1 cm on the ruler. Determine the temperature indicated by the mercury level in . temperature = °C
2. Thermal physics  →  2.2.3. Melting, boiling and evaporation
2. Thermal physics  →  2.2.1. Thermal expansion of solids, liquids and gases
2. Thermal physics  →  2.1.1. States of matter
Open
7
shows a ray of light incident on a plane mirror at point X. 40° ray of light X plane mirror (not to scale) Determine the value of the angle of reflection for the ray of light at point X. On : • draw the normal at point X and label the normal with the letter N • draw the ray reflected from point X. shows how a converging lens forms an image of an object. 28 cm 12 cm 9.0 cm object image (not to scale) Determine the focal length of the lens. focal length = cm Determine the distance of the image from the lens. distance = cm Describe the nature of the image formed by the lens in .
3. Waves  →  3.2.1. Reflection of light
3. Waves  →  3.2.3. Thin lenses
Open
8
shows a mobile phone. State the type of electromagnetic wave used for the mobile phone signal. The screen of the mobile phone emits visible light. State one type of electromagnetic wave with a shorter wavelength than visible light. The mobile phone produces sound waves. State the range of audible frequencies for a healthy human ear. Include the unit. The ring tone of the mobile phone consists of two musical notes, note A and note B. Note A is louder and is higher in pitch than note B. shows note A displayed on an oscilloscope screen. Note B is displayed on the same oscilloscope screen as note A. Describe the differences between the wave for note B and the wave for note A. You may draw on to show the differences.
3. Waves  →  3.4. Sound
3. Waves  →  3.3. Electromagnetic spectrum
Open
9
A student has a permanent bar magnet and two metal bars, as shown in . P Q N metal bar PQ permanent bar magnet metal bar RS S R S The student tests bar PQ and bar RS separately. He holds the N pole of the permanent bar magnet close to each end of each metal bar. Table 9.1 shows the results of the tests. Table 9.1 end of metal bar result of test with N pole P attracted Q repelled R attracted S attracted Deduce whether each metal bar is a magnet, an unmagnetised magnetic material or a non-magnetic material. Give a reason for each of your answers. 1. metal bar PQ 2. metal bar RS
4. Electricity and magnetism  →  4.1. Simple phenomena of magnetism
Open
10
A student determines the resistance of a piece of metal wire XY. shows the wire connected in the circuit. A X variable resistor wire Y The student measures the potential difference (p.d.) across the wire XY. On , show the voltmeter correctly connected. Use the correct symbol. There is a current in the wire. State the name of the particles that flow through the wire. The student removes wire XY and replaces it with another wire CD. Wire CD is the same length and is made of the same material as wire XY, but thinner. State any difference between the current in wire CD and the current in wire XY. Explain your answer. State the unit used for the electromotive force (e.m.f.) of the battery. The resistance of wire CD is 8.7 Ω and the resistance of the variable resistor is 7.4 Ω. Determine the combined resistance of the wire CD and the variable resistor. resistance = Ω The current in the variable resistor is 0.40 A. State the current in wire CD. current = A
4. Electricity and magnetism  →  4.2.3. Electromotive force and potential difference
Open
11
represents the particles in a neutral lithium atom. orbits Use the information in about the lithium atom to answer , and . Determine the number of electrons. Determine the value of the nucleon number. Determine the number of neutrons. The count rate of a radioactive sample is 2400 counts per minute at 10 am on one day. The half-life of the sample is two days. Predict the count rate at 10 am four days later. count rate = counts per minute
5. Nuclear physics  →  5.1.2. The nucleus
5. Nuclear physics  →  5.2.1. Detection of radioactivity
Open
12
shows two circuits, A and B, linked by a relay. relay heater relay switch R switch S relay coil circuit A circuit B 120 V a.c. 6 V + - Describe what happens in the two circuits when switch S is closed. Another circuit includes a transformer. The input voltage of the transformer is 120 V a.c. The input coil has 480 turns of wire and the output coil has 60 turns of wire. Calculate the output voltage of the transformer. output voltage = V
4. Electricity and magnetism  →  4.5.6. The transformer
Open