0625_s17_qp_41
A paper of Physics, 0625
Questions:
11
Year:
2017
Paper:
4
Variant:
1
Login to start this paper & get access to powerful tools
1
is the speed-time graph for an ice skater. 0.0 2.0 4.0 6.0 8.0 10.0 12.0 speed m / s time t / s Explain what is meant by deceleration. Use to determine the distance travelled between times t = 3.0 s and t = 6.0 s, distance = the deceleration between times t = 3.0 s and t = 6.0 s. deceleration = State what happens to the size of the deceleration after time t = 6.0 s. State what happens to the resultant force on the skater after time t = 6.0 s.
1. Motion, forces and energy  →  1.2. Motion
Open
2
A footballer kicks a ball vertically upwards. Initially, the ball is stationary. His boot is in contact with the ball for 0.050 s. The average resultant force on the ball during this time is 180 N. The ball leaves his foot at 20 m / s. Calculate the impulse of the force acting on the ball, impulse = the mass of the ball, mass = the height to which the ball rises. Ignore air resistance. height = While the boot is in contact with the ball, the ball is no longer spherical. State the word used to describe the energy stored in the ball.
1. Motion, forces and energy  →  1.6. Momentum
1. Motion, forces and energy  →  1.7.1. Energy
Open
3
shows remote sensing equipment on the surface of a distant planet. The mass of the equipment is 350 kg. The acceleration of free fall on the surface of this planet is 7.5 m / s2. State what is meant by the term weight. Calculate the weight of the equipment on the planet. weight = The equipment releases a balloon from a point that is a small distance above the surface of the planet. The atmosphere at the surface of this planet has a density of 0.35 kg / m3. The inflated balloon has a mass of 80 g and a volume of 0.30 m3. Make an appropriate calculation and then predict and explain the direction of any motion of the balloon. Show your working. prediction explanation
6. Space physics  →  6.1.2. The Solar System
1. Motion, forces and energy  →  1.2. Motion
1. Motion, forces and energy  →  1.3. Mass and weight
Open
4
A 240 V, 60 W lamp is connected to a 240 V supply. The lamp has a constant temperature. State the rate at which the lamp transfers energy to the surroundings, rate = the names of the thermal processes by which the lamp transfers energy to the surroundings. shows a thick copper block that has been heated to 400 °C. One side of the block is dull black. The other side of the block is polished and shiny. thermometer A thermometer B copper block dull black surface polished shiny surface In Experiment 1, the thermometer bulbs are both painted black. They are placed at equal distances from the surfaces of the block. The maximum temperature shown by each thermometer is recorded. Explain any difference between the maximum temperature shown by the two thermometers. In Experiment 2, the thermometer bulbs are both shiny silver-coloured. They are placed at the same distances from the surfaces of the block as in Experiment 1. State and explain any differences that are observed in the maximum temperatures shown by the thermometers in Experiments 1 and 2. shows a firefighter wearing shiny silver-coloured clothing. State the benefit to a firefighter of wearing shiny silver-coloured clothing.
2. Thermal physics  →  2.3.4. Consequences of thermal energy transfer
2. Thermal physics  →  2.3.3. Radiation
2. Thermal physics  →  2.2.3. Melting, boiling and evaporation
Open
5
shows some gas trapped in a metal cylinder by a piston. gas piston metal cylinder The position of the piston is fixed. The cylinder is moved from a cold room to a warm room. Explain, in terms of molecules, what happens to the pressure of the gas in the cylinder. The piston is now released. It moves to the right and finally stops. Explain these observations in terms of the pressure and the volume of the gas in the cylinder.
2. Thermal physics  →  2.1.3. Gases and the absolute scale of temperature
2. Thermal physics  →  2.2.1. Thermal expansion of solids, liquids and gases
Open
6
A ray of light in glass is incident on a boundary with air. State what happens to the ray when the angle of incidence of the ray is less than the critical angle of the glass, greater than the critical angle of the glass. shows a ray of light incident on a glass block at A. The critical angle of the glass is 41°. 30° air ray of light A B glass block (not to scale) On , without calculation, continue the ray from point B until it leaves the glass block. Calculate the refractive index of the glass. refractive index =
3. Waves  →  3.2.2. Refraction of light
3. Waves  →  3.2.1. Reflection of light
Open
7
A loudspeaker produces a sound wave of constant frequency. State what is meant by frequency. The sound wave travels in air towards a barrier with a small gap at its centre. represents the compressions of the wave travelling towards the barrier. direction of travel compression λ barrier gap barrier State what is meant by a compression. The width of the gap is smaller than the wavelength λ of the wave. On , draw the pattern of the compressions after the sound wave has passed through the gap. The barrier is adjusted so that the gap becomes wider. Describe how this affects the pattern of the compressions after the sound wave has passed through the gap. The frequency of the sound wave is 6800 Hz. The speed of sound in air is 340 m / s. Calculate the wavelength of the sound wave in air. wavelength = State a typical value for the speed of sound in a liquid.
3. Waves  →  3.4. Sound
Open
8
A bar magnet is made of metal. Suggest a metal from which the bar magnet is made. shows the bar magnet being inserted into a coil of wire. The N-pole and the S-pole of the bar magnet are marked. N S movement of magnet coil The coil is connected to a galvanometer. Explain why the galvanometer deflects as the bar magnet is being inserted into the coil. Explain what determines the direction of the reading on the galvanometer. Describe a method for demagnetising a bar magnet.
4. Electricity and magnetism  →  4.1. Simple phenomena of magnetism
Open
9
The resistance of a circuit component varies with the brightness of the light falling on its surface. State the name of the component. Draw the circuit symbol for this component. shows a 6.0 V battery connected in series with a 1.2 kΩ resistor and a thermistor. 1.2 kΩ 6.0 V V At a certain temperature, the resistance of the thermistor is 2.4 kΩ. Calculate the reading on the voltmeter. voltmeter reading = The battery connected to the circuit in is not changed. Suggest a change that would cause the reading of the voltmeter to decrease.
4. Electricity and magnetism  →  4.2.4. Resistance
Open
10
Describe the movement of charge that causes an object to become positively charged. shows a negatively charged rod held over an uncharged metal sphere. insulating support uncharged metal sphere negatively charged rod – – – – – – – – – On , add + and – signs to represent the results of the movement of charge within the sphere. Describe the actions that must be taken to obtain an even distribution of positive charge on the surface of the sphere.
4. Electricity and magnetism  →  4.2.1. Electric charge
Open
11
A radioactive source is tested over a number of hours with a radiation detector. The readings are shown in Table 11.1. Table 11.1 time / hours detector reading / (counts / s) Use the readings to suggest a value for the background count rate during the test, and to determine the half-life of the sample. background count rate = half-life of sample = Hydrogen-3 has one proton and two neutrons. The nucleon number of tritium is three. It decays by emitting a β-particle. Complete the nuclide equation to show this decay. The symbol X represents the nuclide produced by this decay. H β + X The arrows in show the paths of three α-particles moving towards gold nuclei in a thin foil. gold nucleus gold nucleus gold nucleus On , complete the paths of the three α-particles.
5. Nuclear physics  →  5.2.3. Radioactive decay
5. Nuclear physics  →  5.2.1. Detection of radioactivity
Open